|
What can be the difference? In my setup moving vrrp to a physical eth
device solved the bind error.
Might be a bonding driver difference? What do you use?
Here is the relevant portion of my config:
root@wh-lb02:/etc/rc.d# egrep -v -e "^#" -e "^$" rc.bond.conf
HASH=layer3+4
MODE=balance-rr
MONPOLL=100
UPDELAYMULT=0
MAXBONDS=2
Drivers used is the e1000 one:
06:04.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (Copper) (rev 03)
06:04.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (Copper) (rev 03)
06:06.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (Copper) (rev 03)
06:06.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (Copper) (rev 03)
07:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet
Controller (Copper) (rev 01)
07:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet
Controller (Copper) (rev 01)
Regards
Bgs
On Sun, 23 Mar 2008 16:59:42 +0200, alex <alshu@xxxxxx> wrote:
>
>>> Looks like bond related indeed. I added lvs_sync_daemon_interface
>>> and bound it to the admin interface which is a simple eth and no
>>> complaints now...
>>
>> if you really need bond, see if Alexandre has any thoughts
>> on the matter. It may be out of his hands: he is likely just
>> making a call to the network stack.
>>
>> Joe
>
> I use VLANs on bond with Keepalived (i sent my config before)
> without any problems.
>
> Alex
>
>
>
> ----
> Я тут! Найди своих друзей и знакомых на
> TUT.BY!
> http://i.tut.by/
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
