|
On Wed, Mar 26, 2008 at 9:56 AM, Joseph Mack NA3T <jmack@xxxxxxxx> wrote:
> On Wed, 26 Mar 2008, Chad Morland wrote:
>
> > I am trying to get LVS-DR working in a dual home setup.
> >
> > Everything seems to be working fine for VIP1 but requests are timing out
> on
> > VIP2. I can see the requests being distributed to the real server by LVS
> but
> > the response never reaches the user as if arp tables was not configured
> > correctly. Any ideas?
>
> (you don't need arptables to setup an LVS)
>
> If you see the packets going through the director and
> arriving at the realserver, then you've handled the arp
> problem. What sort of info do you get when you telnet to
> 10.10.2.38:80?
>
>
I discovered the problem was related to my routing tables.
The following helped me solve the issue:
http://linux.derkeiler.com/Newsgroups/linux.redhat/2005-05/0223.html
http://lartc.org/howto/lartc.rpdb.multiple-links.html
Thanks again for the response Joe, you are a machine!
-CM
> Joe
>
> --
> Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> jmack (at) wm7d (dot) net - azimuthal equidistant map
> generator at http://www.wm7d.net/azproj.shtml
> Homepage http://www.austintek.com/ It's GNU/Linux!
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>
|
