|
Linuz:
I am working on setting up LVS using Piranah. I have really good notes,
whic will save you few months of pulling hair. Contact me directly:
kirtib@xxxxxxxxxxxxxx
and I will email them to you.
Kirt
=====================================
linuz linuz wrote:
> Hi
>
> Can anybody help me for LVS configuration for below mentioned setup.
>
> I have 6 RHEL5 machines.
>
> s1, s2 and LVS ip( lvs servers and lvsip (VIP)in one network -
> 192.168.10.0).
> s3,s4 with one VIP (realservers) for port 80 and s5,s6 (realservers) with
> one VIP for port 3306 in another 192.168.20.0 network.
>
> I need to setup
>
> one lvs server serves on port 80 to s1 and s2 and from s1 and s2 it should
> connect to second LVS which load balance the db network for port 3306.
> Here LVS(directors) is in 192.168.10.0 network and all real servers in
> another 192.168.20.0 network.
>
> Am using rhel5 piranha with ipvsadm for LVS. I used lvs tun configuration
> but its not working.
> Plz help me for the same.
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>
>
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
