|
Hi Simon,
That's what I try and do.
I edit the /etc/sysconfig/network-scripts/ifcfg-lo:0 file and add the VIP
(174.121.60.28) as the IP address.
DEVICE=lo:0
IPADDR=174.121.60.28
NETMASK=255.255.255.248
ONBOOT=yes
NAME=loopback
This results in a fault. I have been told by the hosting company that I
cannot use 174.121.60.28 in a loopback interface as that is an IP in the
'class b public IP address range'
Should there be a restriction like that?
Kind regards,
Cyrus
-----Original Message-----
From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Simon Horman
Sent: 28 March 2010 11:53
To: LinuxVirtualServer.org users mailing list.
Subject: Re: [lvs-users] Two box lvs with UltrMonkey LO problem
On Sun, Mar 28, 2010 at 10:05:43AM +0100, Cyrus wrote:
> Hello,
>
> I am trying to configure a two-box lvs solution using Ultra-Monkey.
> I am following http://www.ultramonkey.org/3/topologies/sl-ha-lb-eg.html
>
> When I try and configure the loopback interface on Centos according to the
> documentation, I loose the server because the VIP is not in the LO IP
range.
Have you added the VIP, with netmask 255.255.255.255 to the loopback
device? This should be done before starting heartbeat.
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
