|
On Fri, 2010-04-16 at 02:50 -0700, Bacterie wrote:
> I have added another host to the VPN network with the IP 192.168.201.14.
>
> >From it, issuing arping gives off the following:
>
> arping 192.168.201.100
> ARPING 192.168.201.100
> 42 bytes from fe:ff:ff:ff:ff:ff (192.168.201.100): index=0 time=1.205 msec
> 42 bytes from fe:ff:ff:ff:ff:ff (192.168.201.100): index=1 time=1.467 msec
> 42 bytes from fe:ff:ff:ff:ff:ff (192.168.201.100): index=2 time=1.460 msec
> 42 bytes from fe:ff:ff:ff:ff:ff (192.168.201.100): index=3 time=1.481 msec
This is probably why it's not working.
I'm not sure if LVS-DR will work in this environment. You could give
LVS-NAT a try. See
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-NAT.html for
more information. If you can't define 2 different subnets, have a look
at
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-NAT.html#one_network
--
Léon
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
