|
ok but as my packets are not gng to external n/w how to do this using
iptables?
On Thu, Mar 29, 2012 at 1:44 PM, Enno Gröper <enno+lvs@xxxxxxxxxxxxxxxxx>wrote:
> Hi,
>
> Am 29.03.2012 09:25, schrieb Reet Vyas:
> > Hi I have configured LVS router and two real servers(Windows 2003) but
> > packets are coming external but not coming to my eth1(not going to my
> > real servers, using piranha for configuration . i have created VIP for
> > external as well as internal network .
>
> > u can check my ifconfig and i hve
> > installed squid on it cause real servers are on diif network.
> You have been told, that you CAN'T have a client on the LVS node. So you
> MUST NOT run squid on the lvs node. squid shall establish a connection
> to your realservers using the loadbalancer and therefore is a client.
>
> Why are you using squid anyway?
> I don't see why you should need it. Remove it!
> What do you mean with "diif network"? Looking at your configuration your
> LVS node and your real servers are both connected to 192.168.3.0/24.
> And your LVS node has an additional connection to an external network.
> Looks fine. Doesn't need squid.
>
>
> HTH,
> Enno
>
>
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
