|
Hello Alex,
From your ldirectord.conf :
VIP=62.75.229.111
DIP1=217.172.186.175
DIP2=85.25.139.108
Simply to LVS-TUN Guide (i.e
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-Tun.html) :
The VIP at tunl0 must be the same as at ldirectord.conf "virtual"
tunl0 must set to non-arping i.e at sysctl.conf
Regulary LVS setup shuld be anyway 4 systems not 3 - 2 LVS and 2
realservers to not confuse the LVS and kernel and its Routing.
The LVS systems can bee smal systems like an i386 .
To build an LVS Cluster with your env use corosync / pacemakerfor for
failover ldirectord.
see http://clusterlabs.org/wiki/Using_ldirectord
pps : the usage of rfc1912 addresses at VIP may failed to no direct
internet routing of rfc1912 :-) on Extranets
Hope this helps :-)
--
Mit freundlichen Grüßen / Best Regards
Horst Venzke ; PGP NET : 1024G/082F2E6D ; http://www.remsnet.de
Legal Notice: This transmittal and/or attachments may be privileged or
confidential.
It is intended solely for the addressee named above. Any review,
dissemination, or copying is strictly prohibited.
If you received this transmittal in error, please notify us immediately by
reply and immediately delete this message and all its attachments.
Thank you.
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
