|
hi:
I am trying to construct a lvs on my host to schedule different
process listening on different tcp port .
Here is the shell to config director :
VIP=192.168.1.118
8 RIP1=192.168.1.116
9 RIP2=192.168.1.117
10 PORT=8088
11 #
12 case "$1" in
13 start)
14 /sbin/ifconfig eth0:1 $VIP broadcast $VIP netmask 255.255.255.255 up
15 /sbin/route add -host $VIP dev eth0:1
16 # Since this is the Director we must be able to forward packets
17 echo 1 > /proc/sys/net/ipv4/ip_forward
18 # Clear all iptables rules.
19 /sbin/iptables -F
20 # Reset iptables counters.
21 /sbin/iptables -Z
22 # Clear all ipvsadm rules/services.
23 /sbin/ipvsadm -C
24 # Add an IP virtual service for VIP
25 # In this recipe, we will use the round-robin scheduling method.
26 # In production, however, you should use a weighted, dynamic
scheduling method.
27 /sbin/ipvsadm -A -t $VIP:8088 -s rr
28 # Now direct packets for this VIP to
29 # the real server IP (RIP) inside the cluster
30 /sbin/ipvsadm -a -t $VIP:8088 -r $RIP1 -g -w 1
31 /sbin/ipvsadm -a -t $VIP:8088 -r $RIP2 -g -w 2
32 /bin/touch /var/lock/subsys/ipvsadm &> /dev/null
After I configure the director , the real server has not received
any routed packet from director
where haveI token a mistake?
--
Best Regards!
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
