|
the next is my config of cpu irq affinity, the model of director is DR
no rx vectors found on eth0
no tx vectors found on eth0
eth0 mask=1 for /proc/irq/102/smp_affinity
eth0 mask=2 for /proc/irq/103/smp_affinity
eth0 mask=4 for /proc/irq/104/smp_affinity
eth0 mask=8 for /proc/irq/105/smp_affinity
eth0 mask=10 for /proc/irq/106/smp_affinity
eth0 mask=20 for /proc/irq/107/smp_affinity
eth0 mask=40 for /proc/irq/108/smp_affinity
eth0 mask=80 for /proc/irq/109/smp_affinity
eth0 mask=100 for /proc/irq/110/smp_affinity
eth0 mask=200 for /proc/irq/111/smp_affinity
eth0 mask=400 for /proc/irq/112/smp_affinity
eth0 mask=800 for /proc/irq/113/smp_affinity
eth0 mask=1000 for /proc/irq/114/smp_affinity
eth0 mask=2000 for /proc/irq/115/smp_affinity
eth0 mask=4000 for /proc/irq/116/smp_affinity
eth0 mask=8000 for /proc/irq/117/smp_affinity
eth0 mask=10000 for /proc/irq/118/smp_affinity
eth0 mask=20000 for /proc/irq/119/smp_affinity
eth0 mask=40000 for /proc/irq/120/smp_affinity
eth0 mask=80000 for /proc/irq/121/smp_affinity
eth0 mask=100000 for /proc/irq/122/smp_affinity
eth0 mask=200000 for /proc/irq/123/smp_affinity
eth0 mask=400000 for /proc/irq/124/smp_affinity
eth0 mask=800000 for /proc/irq/125/smp_affinity
eth0 mask=1000000 for /proc/irq/126/smp_affinity
eth0 mask=2000000 for /proc/irq/127/smp_affinity
eth0 mask=4000000 for /proc/irq/128/smp_affinity
eth0 mask=8000000 for /proc/irq/129/smp_affinity
eth0 mask=10000000 for /proc/irq/130/smp_affinity
eth0 mask=20000000 for /proc/irq/131/smp_affinity
eth0 mask=40000000 for /proc/irq/132/smp_affinity
eth0 mask=80000000 for /proc/irq/133/smp_affinity
problem:
this my load of cpu interrupt, why it concentrates in front of 16 cpus ?
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
