|
I find the issue. In DR mode, when director forward the packet, the source
mac address is LVS director mac, and the destination mac address is Real
server mac address, but the IP packet won't change. If I specific the
interface (-i eth1 for example) when do tcpdump it will print the details.
2016-12-23 18:04 GMT+08:00 linbo liao <llbgurs@xxxxxxxxx>:
> Hi,
>
> I want to setup a LVS cluster to loadbalance UDP server. The test setup
> use an echo UDP server, the setup:
>
>
> *# Environment*
>
> 1. LVS Director: 172.24.143.181 Redhat 6.6 x86_64
> 2. RS: 172.24.143.182 Redhat 6.6 x86_64
> 3. VIP 172.24.143.187
> 4. ipvs 1.2.1
> 5. keepalived v1.2.23
> 6. test client: 172.24.143.183 Redhat 6.6 x86_64
>
> *# Configure*
>
> keepalived.conf
>
> virtual_ipaddress {
>> 172.24.143.187 dev eth1
>> }
>
> .....
>>
> virtual_server 172.24.143.187 3333 {
>> delay_loop 6
>> lb_algo rr
>> lb_kind DR
>> protocol UDP
>>
>> real_server 172.24.143.182 3333 {
>> weight 1
>> }
>> }
>>
>
> $ ipvsadm -Ln
>
>> UDP 172.24.143.187:3333 rr
>> -> 172.24.143.182:3333 Route 1 0 0
>
>
> *# UDP server*
>
> RS run UDP server http://svn.python.org/projects/python/trunk/Demo/
> sockets/udpecho.py
>
> *s.bind(('172.24.143.187', port)) # udp listen VIP address*
>>
>
> $ python udpserver.py -s 3333
>
>
>
> *# Test*$ nc -u 172.24.143.187 3333
> job
> job
>
>
> *# Tcpdump on LVS director (2 packet are duplicated, but one is
> padding)*18:03:33.778558
> In 00:50:56:83:68:bd ethertype IPv4 (0x0800), length 62: (tos 0x0, ttl 64,
> id 46680, offset 0, flags [DF], proto UDP (17), length 32)
> 172.24.143.183.56006 > 172.24.143.187.3333: [udp sum ok] UDP, length 4
> 0x0000: 0000 0001 0006 0050 5683 68bd 0000 0800 .......PV.h.....
> 0x0010: 4500 0020 b658 4000 4011 0cd1 ac18 8fb7 E....X@.@.......
> 0x0020: ac18 8fbb dac6 0d05 000c d3ec 6a6f 620a ............job.
> 0x0030: 0000 0000 0000 0000 0000 0000 0000 ..............
> 18:03:33.778598 Out 00:50:56:83:06:ef ethertype IPv4 (0x0800), length 48:
> (tos 0x0, ttl 64, id 46680, offset 0, flags [DF], proto UDP (17), length 32)
> 172.24.143.183.56006 > 172.24.143.187.3333: [udp sum ok] UDP, length 4
> 0x0000: 0004 0001 0006 0050 5683 06ef 0000 0800 .......PV.......
> 0x0010: 4500 0020 b658 4000 4011 0cd1 ac18 8fb7 E....X@.@.......
> 0x0020: ac18 8fbb dac6 0d05 000c d3ec 6a6f 620a ............job.
>
>
> *# Tcpdump from client (the output does make sence, one is outgoing
> packet, one is incoming packet)*18:03:33.776888 Out 00:50:56:83:68:bd
> ethertype IPv4 (0x0800), length 48: (tos 0x0, ttl 64, id 46680, offset 0,
> flags [DF], proto UDP (17), length 32)
> 172.24.143.183.56006 > 172.24.143.187.3333: [bad udp cksum 2b5c!] UDP,
> length 4
> 0x0000: 0004 0001 0006 0050 5683 68bd 0000 0800 .......PV.h.....
> 0x0010: 4500 0020 b658 4000 4011 0cd1 ac18 8fb7 E....X@.@.......
> 0x0020: ac18 8fbb dac6 0d05 000c 77c1 6a6f 620a ..........w.job.
> 18:03:33.778472 In 00:50:56:83:6b:cd ethertype IPv4 (0x0800), length 62:
> (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 32)
> 172.24.143.187.3333 > 172.24.143.183.56006: [udp sum ok] UDP, length 4
> 0x0000: 0000 0001 0006 0050 5683 6bcd 0000 0800 .......PV.k.....
> 0x0010: 4500 0020 0000 4000 4011 c329 ac18 8fbb E.....@.@..)....
> 0x0020: ac18 8fb7 0d05 dac6 000c d3ec 6a6f 620a ............job.
> 0x0030: 0000 0000 0000 0000 0000 0000 0000 ..............
>
> Why two same packet show on LVS director, any one know the reason?
>
> Thanks,
> Linbo
>
>
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
