|
Hi,
What i'm basically trying to set up is as
follows....
1 LVS box with 2 network cards and 2 network
addresses... One (eth0) 192.168.1.211 which is visible to the rest of the
network and (eth1) 192.168.15.1 which is visible to the two web
boxes....
The two web boxes have the IP's of 192.168.15.2 and
192.168.15.3 ....
Using the script below i can't seem to get the
configure script to run correctly... Can anyone see an obvious problem as i'm
stumped...
I'm a newbie to this load balancing so be kind
;-))
#----------lvs_nat.conf------------------------------------
LVSCONF_FORMAT=1.0
LVS_TYPE=VS_NAT
INITIAL_STATE=on
CLEAR_IPVS_TABLES=yes
VIP=eth0
192.168.1.211 255.255.255.0
DIRECTOR_INSIDEIP=eth1 192.168.15.1 255.255.255.0
192.168.15.255
DIRECTOR_GW=192.168.1.254
#SERVICE=t ftp rr sneezy:ftp
bashfull:ftp
SERVICE=t telnet rr 192.168.15.2:telnet
192.168.15.3:telnet
SERVICE=t netpipe rr 192.168.15.2:netpipe
192.168.15.3:netpipe
SERVICE=t http rr 192.168.15.2:http
192.168.15.3:http
#SERVICE=t https rr
sneezy:https
SERVER_NET_DEVICE=eth0
#no server vip device for real-server
for VS-NAT
#SERVER_VIP_DEVICE=
#no default gw for real-server with
VS-NAT
#SERVER_GW=
#----------end
lvs_nat.conf---------------------------------
What am i doing wrong???
thanx
| 