|
Hi all,
I have machine with red linux 6.2 with kernel 2.2.16 patched with
lvs-version 0.9.15. This machine which acts as load balancer has two NICs
one eth0 172.16.1.104 and eth0:0 172.16.1.103 (vip) and the other eth1
172.16.2.4 and eth1:0 172.16.1.254 (router ip) .
eth0 is connected to a client network whose ip starts from 172.16.1.1 to
172.16.1.110 and eth1 is connected to a real server network. I have two
realservers with one with ip 172.16.2.3 and the other with 172.16.2.5.
I have modified the file /etc/sysctl.conf for packet forwarding and
defragmenting and added the line
ipchains -A forward -j MASQ -s 172.16.2.0/24 -d 0.0.0.0/0
in the file rc.local.
I have set the default gateway for the real servers as 172.16.2.254
Now when i start the pulse daemon and try to access the webpage from
http://172.16.1.103 I am unable to get any
page from the real servers.
when i stop pulse and lvs daemons, i am able get the pages from the Load
balancer machine.
Here is my lvs.cf file.
primary = 172.16.1.104
service = lvs
rsh_command = rsh
backup_active = 0
backup = 0.0.0.0
heartbeat = 1
heartbeat_port = 539
keepalive = 6
deadtime = 18
network = nat
nat_router = 172.16.2.254 eth1:0
virtual lvs104 {
active = 1
address = 172.16.1.103 eth0:0
port = 80
send = "GET / HTTP/1.0\r\n\r\n"
expect = "HTTP"
load_monitor = ruptime
scheduler = wlc
protocol = tcp
timeout = 6
reentry = 15
server php3{
address = 172.16.2.3
active = 1
weight = 1000
}
server help{
address = 172.16.2.5
active = 1
weight = 2000
}
}
Someone please guide me to overcome this problem.
-Schillaci
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
|
