|
guioc@xxxxxxxxxxxxxxxx wrote:
> I am working on a cluster that has nodes with IP's ranging from 192.168.1.1
> through 192.168.1.20 (called node1 through node20).
> I succeded in patch, compile, install and load ipvs module. After this I
> created
> a VIP 192.168.1.77 on node2 to serve as the cluster IP
> /sbin/ipvsadm -a -t 192.168.1.77:22 -r 192.168.1.15:22 -m -w 1
> /sbin/ipvsadm -a -t 192.168.1.77:22 -r 192.168.1.16:22 -m -w 1
If you're using LVS-NAT and all IPs are on the same network, then read
the one-network writeup for LVS-NAT
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
SAIC, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
|
