|
On 1/26/06, Dominik Klein <dk@xxxxxxxxxxxxxxxx> wrote:
> eth0 should be sufficient here
I am using only one nic card, so I had to have the alias for the VIP as well
as the DIP.
> > virtual_ipaddress{
> > dev eth0:208 x.x.x.208/255.255.255.255
>
> > virtual_ipaddress{
> > dev eth0 x.x.x.217/255.255.255.224
Try to start keepalived with -d and -D to see if it gives any
> error-messages in /v/l/m
No error messages showed up on either.
> Do you see the new ips on the devices after keepalived has started?
I did an ifconfig eth0 down; and then started keepalived:
/etc/init.d/keepalived start; and the interfaces did not come back up...
-Matt Chan
|
