|
Joseph,
You correctly discerned that I had not read the LVS HOWTO. I have now
begun to remedy that situation.
So far, I have read enough to know that: (1) the ftp helper module is
called ip_masq_ftp; (2) according to lsmod and ps, it is not running on
my system when ldirectord is running; (3) that's okay because the HOWTO
states that it is only required for passive FTP, and I'm just trying to
get FTP working in active mode.
Furthermore, it does not appear to be a multi-port or NAT problem
because when the client's SYN arrives on the load-balancer's outside
interface, no packets at all are sent on its internal interface. It just
sends back a RST on the outside interface. Now isn't that special?
--
Eric Robinson
Disclaimer - July 15, 2006
This email and any files transmitted with it are confidential and intended
solely for LinuxVirtualServer.org users mailing list.,jmack@xxxxxxxxx If you
are not the named addressee you should not disseminate, distribute, copy or
alter this email. Any views or opinions presented in this email are solely
those of the author and might not represent those of Physician Select
Management (PSM) or Physician's Managed Care (PMC). Warning: Although the
message sender has taken reasonable precautions to ensure no viruses are
present in this email, neither PSM nor PMC can accept responsibility for any
loss or damage arising from the use of this email or attachments.-----Original
Message-----
From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Joseph
Mack NA3T
Sent: Saturday, July 15, 2006 7:29 AM
To: LinuxVirtualServer.org users mailing list.
Subject: RE: ldirectord works for HTTP but Not FTP
On Fri, 14 Jul 2006, Robinson, Eric wrote:
> I believe so, but I'm not sure. (You asked the same question on 7/3
> and Horms replied that it has been set to auto-load for several
> versions now).
yes
>
> Just to be sure, what is the name of the module I would look for with
> lsmod?
the name is in the HOWTO. You only need the helper modules if you're
running LVS-NAT. If not, you need to read about setting up ftp for the
other for the other forwarding methods. I presume ldirectord handles the
setup for ftp for LVS-DR etc, but I don't know.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|
