|
On Wed, 17 Oct 2012, Net Ground - Frederique Rijsdijk wrote:
> Hi,
>
>
> We have a LVS-DR setup (currently figure 1), where the
> keepalived hosts use tagged vlan interfaces to 'be' in the
> same broadcast lans as the realservers. This all works
> fine for the clients. The problem is that realserver1/2
> can not reach VIP2, and realserver 3/4 can not reach VIP1.
> But even 'other' hosts, like "other server1" and "other
> server2", that are in the same VLANs as respectivly
> realserver1/2 and realserver3/4, can not reach neither
> VIPs. I can see the SYN packets reaching the VIP on the
> director, but keepalived seems to do nothing with them.
> I'm not sure if there is a solution for this. Is there?
real "clients on realservers" in the HOWTO
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
