|
----- Original Message -----
From: "Joseph Mack" <mack.joseph@xxxxxxx>
To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, January 18, 2001 6:05 AM
Subject: Re: My first attempt
> Ivan Figueredo wrote:
>
> > I am not sure what I am doing wrong. I thought I saw a post about LVS
not
> > working if all machines are on the same (sub)net, but I am not sure...
>
> yes you can do it, but it's a lot easier if you have the client and the
> real-servers
> are on different networks
So, If *add* to eth0 the IP address, say, 192.168.0.1, then will that will
do? Also, do I have to do *anything* on the "real" server(s) - I didn't
touch them...
Ivan
> Joe
>
>
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|
