|
Dear All,
I have two real servers with a single virtual server , , I have
installed the Red Hat 6.2 Full installation , which involves ipvsadm, piranha
, piranha GUI, and piranha doc . NO extra packages have been tried so far.
My first question
Are these packages sufficient for a load balancing cluster ?
Now my second question?
My setup is like this ,
Real server1
eth0 :192.168.1.2
default gateway :192.168.1.254
Real server2
eth0:1921.168.1.3
default gateway: 192.168.1.254
Director
eth0 :151.8.105.105
eth0:0 :151.8.106.106 (my virtual IP)
eth1: 192.168.1.1
eth1:0 :192.168.1.254
I configured my Apache in my both the real servers identically, with the
server names 192.168.1.2 & 192.168.1.3 respectively Virtual server
configuration in Piranha is like this ..
Virtual server ip : 151.8.105.105
Server type : http
Real server1 : 192.168.1.2 : 80
Real server2 : 192.168.1.3 : 80
Now to my second question : I am not getting my web page from the public
network server 151.8.100.100 . Instead I am getting the default page in the
Apache running on my director. I am getting the error as this
"" Connection was refused by the server
Either the server is not recieving the requests or may be busy ... """
I am getting the same from my director even . I checked with my real
servers there the web servers are running normally. What could be the wrong?
Any suggestions please ...................... Sorry for the
Long letter , Consider me as a beginner
Vinod.
|
