|
Both the LVS IP ADDRESS and the NAT ROUTER IP ADDRESS
are to failover between two LVS hosts. Your default
gateway should be the NAT ROUTER IP.
Peter
--- Jon Neher <jneher@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> Hello,
>
> Thanks to those who gave me good advice on getting
> director failover
> setup. I'm still having a problem however.
>
> The lvs is working fine with one director with the
> default
> gateway on the realservers set to point at the DIP
> on the director,
> in this case 192.168.1.9. My problem now is that I
> have
> heartbeat/ldirectord failover setup on the director
> and when I fail
> the director over to the DIP on the second director,
> 192.168.1.10
> I have to reset the default gateway on the
> realserver to
> 192.168.1.10.
>
> Does anybody have any ideas on this?
>
> Thanks,
>
> Jon
>
> Computing Center Internet:
> jneher@xxxxxxxxxxxxxxxxxxxx
> University of Oregon WWW
> http://darkwing.uoregon.edu/~jneher
> Eugene, OR 97403-1212 Amateur Radio: N7WNX
> Voice: (541) 346-1731
> Fax: (541) 346-4397
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list -
> lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to
> lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to
http://www.in-addr.de/mailman/listinfo/lvs-users
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com
|
