|
It's using the 2.4.20 kernel w/ a bonding patch don't remember which one
exactly may be bonding-2.4.20-20030320. The switch the realserver and
director are on uses tagged vlans.
bonding options:
options bonding miimon=100 mode=1
ians config:
TEAM ians
TEAMING_MODE AFT
VLAN_MODE off
PROBE_ENABLE disabled
MEMBER eth0
PRIORITY primary
MEMBER eth1
PRIORITY secondary
VADAPTER team0
On Thu, 2003-11-06 at 17:17, Brian Tinsley wrote:
> I use both iANS (Intel) and bonding in LVS clusters (on both load
> balancers and real servers) and have never seen this type of problem.
> Could you post your bonding driver options and iANS config file? Are you
> using tagged VLANS? What kernel version are you using?
>
>
>
> > > I'm using lvs-dr and it works great, until I added a realserver that
> > > used linux channel bonding. when I added it I could not connect to the
> > > service at all from outside the network. Switched the realserver over to
> > > Intel's teaming driver and the problem went away (also works when using
> > > just one nic). Anyone know what causes this or seen this before?
> > >
> > > _______________________________________________
> > > LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> > > Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> > > or go to http://www.in-addr.de/mailman/listinfo/lvs-users
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> > Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> > or go to http://www.in-addr.de/mailman/listinfo/lvs-users
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
