|
Hi,
Nathan wrote:
Bonding is being loaded when the box boots from modules.conf.
eepro100 (one of the build in nic is a 10/100) and the e1000 driver.
The eepro100 never really worked well for me in conjunction with
bonding. I also use the e100/e1000 drivers as suggested by Brian.
Also note that the bonding architecture has gotten a major (actually
huge) overhaul during the 2.4.21-preX <-> 2.4.23-preX phase. Among them
is the possibility to set and change the MAC and the MTU in ALB/TBL
modes, fixed arp monitoring, better 802.3ad support and proper locking.
You might wanna play with some of the never 2.4.23-pre kernels or at
least with 2.4.22 if the problem persists, then again it's highly
time-consuming to follow latest ("stable") development kernels currently.
Best regards,
Roberto Nibali, ratz
--
echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq'|dc
|
