|
On Mon, 23 Feb 2004, Peter Mueller wrote:
> > I've put the VIP in eth0:0 with this configuration
> > file /etc/sysconfig/network-scripts/ifcfg-eth0:0 (see below)
> >
> > DEVICE="eth0:0"
> > BOOTPROTO="none"
> > ONBOOT="yes"
> > IPADDR="66.98.227.143"
> > NETMASK="255.255.254.0"
>
> No. Let heartbeat decide all this and do it for you. All you have to do is
> put the proper setting in /etc/ha.d/haresources. Please see Horm's
> excellent documentation @ http://www.ultramonkey.org/2.0.1/topologies/,
> browse the list archives @ marc.theaimsgroup.com, or perhaps use the HOWTO;
> I think Joe might have a few examples in there.
>
Hi Peter,
Unfortunately Heartbeat got me into trouble in the first place.
My ISP detected ARP stuff happening on the switch and decided to unbind
the IP address.
I would prefer to get the most minimal configuration working
first. I'm trying to do TUN between one director and one real server.
The outside world can ping the VIP. The director's connection to
the Real Server is alive and working fine but when I connect from an
external browser it locks up.
What do you think is the easiest/quickest way to proceed? Should I
go for a complete re-install (heartbeat included)?
NIge
> P
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
--
Nigel Hamilton
Turbo10 Metasearch Engine
email: nigel@xxxxxxxxxxx
tel: +44 (0) 207 987 5460
fax: +44 (0) 207 987 5468
________________________________________________________________________________
http://turbo10.com Search Deeper. Browse Faster.
|
