|
Hi,
I want to set up a IPv6 load balancer in direct routing mode. So I configure a
IPv6 address an my loadbalancer and the same IPv6 addr on the lo interface of
the real servers.
No to the problem:
Since the IPv6 is the last IPv6 address configured on the interface in that
subnet the loadbalancer uses this IPv6 addr to communicate with the real
server. The real server answers to the IPv6 addr on the lo interface and to
communication is possible.
So no connection from the loadbalancer to the real server is possible.
I found a solution via the ip -6 addlabel (see RFC 6724). No I am wondering if
the is a more simle solution. Any hints? Thanks.
--
Mit freundlichen Grüßen,
Michael Schwartzkopff
--
[*] sys4 AG
http://sys4.de, +49 (89) 30 90 46 64, +49 (162) 165 0044
Franziskanerstraße 15, 81669 München
Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer
Aufsichtsratsvorsitzender: Florian Kirstein
signature.asc
Description: This is a digitally signed message part.
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
| 