|
At 16:23 99-3-31 -0800, Shi, Eddie E wrote:
>Wensong,
> Looking at your setup I only see the ip takeover on eth0 side but not on
>the eth1 side.
> I have a configuration where my Linux has 2 interfaces : eth0 is the front
>end interface
> to webclients, eth1 is the backend to the Real servers(NT). Does the
>Secondary need also take over the IP address of the Primary 's
>backend(eth1). If not , how does the Real server,
> Window's NT, know how to route the packet to Secondary if Primary is down.
Yeah, your backup need to take over the virtual IP address (to the clients)
and the internal address (to the real servers) in your setup. You just need
to add another fake command to take over the internal address in the
/etc/ha.d/harc scripts.
In the high-availability page, there is just an running example in which
virtual server via tunneling is used and the load balancer has only one
interface, so it just needs to take over one IP address (the virtual IP
address). So, you need to adapt it to your own setup.
>
> Thanks !!
>
>Eddie
>
Good luck,
Wensong
|
