|
On Thu, Sep 14, 2000 at 07:15:14PM -0400, Jeremy Hansen wrote:
> > > ipvsadm -A -f 1 10.2.9.5:0
> > ^ You don't need this Address:Port, in fact it is
> > syntacically incorrect. The command should be
> > ipvsadm -A -f 1
>
> Oh, huh. Cool.
>
> > You will need to select a service for ldirectord to monitor. HTTP is
> > probably as good as any.
> >
> > You can specify port 80 for the real servers as ipvsadm ignores the port if
> > you are adding a real server to a fwmark service. Alternativley if
> > you add connectport=80 to the setup above I believe you will
> > get what you want.
>
> Great, I'll try this. Sorry if this is documented, I think the ldirectord
> man page out of date, but I probably just missed it.
I think that the documentation needs clarification. I shall
fix this.
--
Horms
|
