|
Dear All,
I am trying to configure the lvs router with one NIC card. But pulse is not
getting started and shows the following error:-
Starting pulse: pulse: error parsing /etc/lvs.cf on line 11.
my lvs.cf is very simple with only one real server. I am not able to trace
what the problem is!!. the /etc/lvs.cf is as follows:-
#global section
primary = 10.10.10.101
backup = 10.10.10.29
keepalive = 2
deadtime = 10
heartbeat_port = 1050
rsh_command = rsh
network = nat
nat_router = 192.168.1.254 eth0:3
#per-virtual-server section
virtual server vs1 {
address = 10.10.10.102
active = 1
load_monitor = uptime
timeout = 10
reentry = 180
port = 80
scheduler = wlc
#per-real-server section
server rs1 {
address = 192.168.1.3
active = 1
weight = 2000
}
}
what could be the problem???? any advices please!!!!!!!!
Regards
Rajesh
_____________________________________________________________________________________
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
| 