|
Matthias Weimann wrote:
>
> Hi
> It won`t work here.
> The test equipment is a network running at 10.10.10.0/24.
> Then I have 2 Linux boxes. 1 as director and another as real-server.
> And a windows box 10.10.10.14 is the client. There is only 1 networkcard in
> the director.
> The config script isn`t running
why not, what error messages do you get?
and so I have to do this by hand.
> I gave the real server the IP 192.168.100.100 and the director
> 192.168.100.110 on eth0:0
> and 10.10.10.13 on eth0. At the real server the default GW is
> 192.168.100.110 (the director at eth0:0).
> Also MASQ is activated. It won`t work.
we need more information.
look at
http://www.linuxvirtualserver.org/Joseph.Mack/HOWTO/LVS-HOWTO_1.0-1.html#ss1.6
if you need suggestions for reporting problems
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
