LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: ipchains -> iptables

To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: ipchains -> iptables
From: Stuart Fox <stuart@xxxxxxxxxxx>
Date: Thu, 26 Apr 2001 15:37:48 +0100
Joseph Mack wrote:
> 
> Stuart Fox wrote:
> 
> > The problem is getting a response back through the load balancers.
> > The real servers can get through fine when access the wed, but the
> > getting
> > a response back when rewuesting one of the virtual servers wont work!
> >
> > Im pretty sure its an IPTables problem. Ive tried several solution but
> > none seem to work.
> 
> I assume you have a VS-NAT setup. I know nothing about SNAT, but I can
> setup a VS-NAT 2.4.x LVS without any ip_tables rules. The masquerading
> rules that were required for 2.2.x directors in VS-NAT are now
> part of the IPVS code.
> 
> Joe
> 
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
> 
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users

Never heard of the VS-NAT bit,  where do i get it and does it work with
the RH
piranha package?

Thanks

Stuart

Attachment: stuart.vcf
Description: Card for Stuart Fox

<Prev in Thread] Current Thread [Next in Thread>