|
Hi,
When i run the rc.lvs_nat script i get the following errors although the LVS
box does seem to be balancing http traffic.
Error: executable fping not found
Error: executable ntpd not found
Error: executable ip not found
Error: executable iptables not found
What i basically want is only HTTP traffic and HTTPS to be balanced and all
other services to be externally routable. All boxes are redhat 6.2 on the
2.2.19 kernel and the single LVS box is running ipvs-1.0.7-2.2.19.
My lvs_nat.conf looks like this...
#----------lvs_nat.conf------------------------------------
LVSCONF_FORMAT=1.0
LVS_TYPE=VS_NAT
INITIAL_STATE=on
CLEAR_IPVS_TABLES=yes
VIP=eth0 192.168.1.211 255.255.255.0 195.168.1.155
DIRECTOR_INSIDEIP=eth1 192.168.15.1 255.255.255.0 192.168.15.255
DIRECTOR_GW=192.168.1.254
#SERVICE=t ftp rr 192.168.15.2:ftp 192.168.15.3:ftp
#SERVICE=t 40 rr 192.168.15.2:telnet 192.168.15.3:telnet
#SERVICE=t netpipe rr 192.168.15.2:netpipe 192.168.15.3:netpipe
SERVICE=t http rr 192.168.15.2:http 192.168.15.3:http
SERVICE=t https rr 192.168.15.2:https 192.168.15.3:https
SERVER_NET_DEVICE=eth0
#no server vip device for real-server for VS-NAT
#SERVER_VIP_DEVICE=
#no default gw for real-server with VS-NAT
#SERVER_GW=
#----------end lvs_nat.conf---------------------------------
Is this possible so telnet and ftp can bypass the LVS? If so how?
thanx
> > Tom Brown wrote:
> >
> > i can't seem to get the configure script to run correctly
>
> what errors do you get?
>
> Joe
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|
