LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Problem with LVS-NAT-Default gateway.

To: "LVS" <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Problem with LVS-NAT-Default gateway.
From: "Schillaci" <lvslog@xxxxxxxxx>
Date: Sat, 2 Jun 2001 14:13:54 +0530
I have installed lvs1.0.7 in 2.2.19 kernel.(LVS-NAT) . I have also installed
ultramonkey heartbeat and ldirectord. There is an aliased
interface(eth1:0=192.168.1.254  in the real server side of the director)
which is acting as the default gateway for the real servers. But the lvs is
not working with this configuration. But if I give eth1
interface(eth1=192.168.1.2) of the director as the default gateway for the
real servers, then it is workng fine.

I need this configuration for High-availbility service. That is, the default
gateway should be a floating ip, which would transfer from the active
director to backup director.

Has anyone faced this sort of problems? Your suggestions are most welcomed
to get around this problem.

-Schill




_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



<Prev in Thread] Current Thread [Next in Thread>