|
Thanks Joseph Mack,
I gave the command "route add default gw 192.168.1.254" manually and now it
is working fine.
Now i am trying to proceed for LVS-DR.
-Schill
----- Original Message -----
From: Joseph Mack <mack@xxxxxxxxxxx>
To: LVS <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Sunday, June 03, 2001 5:13 AM
Subject: Re: Problem with LVS-NAT-Default gateway.
> On Sat, 2 Jun 2001, Schillaci wrote:
>
> > I need this configuration for High-availbility service. That is, the
default
> > gateway should be a floating ip, which would transfer from the active
> > director to backup director.
>
> this is the standard way of doing it. YOu have to let all the other NICs
> on the network know that the IP has moved to a new MAC by running send-arp
> (or some functional equivalent). Maybe this isn't working in your set up.
>
> Joe
>
>
> --
> Joseph Mack mack@xxxxxxxxxxx
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
|
