Re: Https with configure 0.8

[Andy Erickson <andy@xxxxxxxx>]

still getting the same problem. here is the config file and the ipvs table

#----------lvs_dr.conf----------------------------------------
LVSCONF_FORMAT=1.0
LVS_TYPE=VS_DR
INITIAL_STATE=on
CLEAR_IPVS_TABLES=no
VIP=eth0:110 207.100.37.10 255.255.255.255 207.100.37.10
DIRECTOR_INSIDEIP=eth0 207.100.37.2 255.255.255.0 207.100.37.255
#no default gw for director with VS-DR or VS-Tun
#DIRECTOR_GW=
#SERVICE=t telnet rr sneezy bashfull
SERVICE=t http rr 207.100.37.3:80 207.100.37.4:80 207.100.37.5:80
SERVICE=t https rr 207.100.37.3:443 207.100.37.4:443 207.100.37.5:443
SERVER_VIP_DEVICE=lo:110
SERVER_NET_DEVICE=eth0
SERVER_GW=207.100.37.1
#----------end lvs_dr.conf------------------------------------


the table

IP Virtual Server version 1.0.8 (size=4096)
Prot LocalAddress:Port Scheduler Flags
 -> RemoteAddress:Port             Forward Weight ActiveConn InActConn
TCP  207.100.37.10:0 rr persistent 360
 -> lvsrs1.emji.net:0              Route   1      0          0
TCP  207.100.37.10:www rr
 -> lvsrs3.emji.net:www            Route   1      0          0
 -> lvsrs2.emji.net:www            Route   1      0          0
 -> lvsrs1.emji.net:www            Route   1      0          0

Thanks for any help
Andy

--On Thursday, June 21, 2001 3:12 PM -0400 Joseph Mack 
<mack.joseph@xxxxxxx> wrote:
> Andy Erickson wrote:
> > I have one more problem for the group. When I use the configure script to
> > add the https service for three lvs-dr servers. Only the first server
> > gets added to the table. Here is the lvs_dr.conf.443 script I am using.
> >
> > #----------lvs_dr.conf----------------------------------------
> > LVSCONF_FORMAT=1.0
> > LVS_TYPE=VS_DR
> > INITIAL_STATE=on
> > CLEAR_IPVS_TABLES=no
> > VIP=eth0:443 207.100.37.10 255.255.255.255 207.100.37.10
>            ^^^
> I think this has to be a number 0-255.
> I use the last part of the quad of the VIP, just so I don't have a name
> space collision and can have multiple independant VIPs.
>
> > DIRECTOR_INSIDEIP=eth0 207.100.37.2 255.255.255.0 207.100.37.255
> > #no default gw for director with VS-DR or VS-Tun
> > #DIRECTOR_GW=
> > #SERVICE=t telnet rr sneezy bashfull
> > #SERVICE=t ftp rr sneezy bashfull
> > SERVICE=t https rr 207.100.37.3 207.100.37.4 207.100.37.5
> > SERVER_VIP_DEVICE=lo:443
>                        ^^^
> same here
>
> > SERVER_NET_DEVICE=eth0
> > SERVER_GW=207.100.37.1
> > #----------end lvs_dr.conf------------------------------------
> otherwise looks OK. Let's see if the problem persists after fixing the lo
> device.
>
> Joe
>
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA