|
Bill Hatter wrote:
>
> I can connect to the VIP on the director from the same network as the RIP,
> but cannot connect to the network from the other side of the Router which
> connects to the director.
The diagram, one you boil it all down (and if you assume box "NS" has
no effect on packets), is a normal VS-DR setup.
Your info above suggests that the router is not setup properly.
However you say that you can connect to the VIP on the director,
and indeed you may have, but you haven't shown me that you have.
You may be connecting to the VIP on one of the realservers.
Your statement requires that you connecting from a box with
a 65.x.x.x address on the 192.x.x.x network. The routing is
wrong for that.
You're inviting a lot of pain to setup an LVS with all this stuff
hanging of it. I certainly couldn't have my first time.
Can you try telnet with a couple of boxes
not connected to anything else first?
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
