Re: lvs setup via tunelling problem

[Djamil ESSAISSI <djamil@xxxxxxxxxxxxxxxx>]

hmm now that i put in a bogus ip to tunl0 the files appeared !

fx0:/usr/src/linux# ifconfig tunl0 234
fx0:/usr/src/linux# ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:50:DA:DE:98:BB  
          inet addr:212.43.221.78  Bcast:212.43.221.127  Mask:255.255.255.192
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:5315556 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3406374 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          Interrupt:11 Base address:0xcc00 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 

lo:154    Link encap:Local Loopback  
          inet addr:212.43.218.154  Mask:255.255.255.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1

tunl0     Link encap:IPIP Tunnel  HWaddr   
          inet addr:0.0.0.234  Mask:0.0.0.0
          UP RUNNING NOARP  MTU:1480  Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 

ls /proc/sys/net/ipv4/conf/tunl0/
accept_redirects     bootp_relay   mc_forwarding  secure_redirects  tag
accept_source_route  forwarding    proxy_arp      send_redirects
arp_filter           log_martians  rp_filter      shared_media


sweet linux ! --- any reactions ? :)