|
weird ...
as i said now it works ...
ssh / httpd too !
but this set up is in two separate subnets in the same datacenter ...
now i'm trying with another network in a different datacenter ... tcpdump on
that (far) RS shows nothing ...it'an SMP 2.4.4ac3 ...
fx0 is 2.4.12ac3 .. maybe that 2.4.4 is funky since birth !
BTW :
ip route get to 212.43.218.154 from 193.252.175.157 iif tunl0
i really hope that it's not because of this command that cfx5 -> fx0 works !!
as you can imagine i wont be able to do that for every client connection ! :)
##
cfx5.tgv.net is the director in datacenter A network 1
fx0.tgv.net is a RS in datacenter A network 2
ls04.tgv.net is a RS in datacenter B network 3
193.252.175.157 is our office's router ... so my CIP
##
please enlighten me !
On Wed, 17 Oct 2001 15:24:22 +0300 (EEST)
Julian Anastasov <ja@xxxxxx> wrote:
:)
:) Hello,
:)
:)On Wed, 17 Oct 2001, Djamil ESSAISSI wrote:
:)
:)> good morning !
:)>
:)> hmm even if telnet from CIP to RIP works ?
:)
:) I'm not sure, try with another service that detects the VIP
:)as valid IP to listen on (probably started after the VIP is
:)configured).
:)
:)
:)Regards
:)
:)--
:)Julian Anastasov <ja@xxxxxx>
:)
:)
:)_______________________________________________
:)LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
:)Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
:)or go to http://www.in-addr.de/mailman/listinfo/lvs-users
:)
--
Djamil ESSAISSI
Tel:01.58.64.22.44 - Fax:01.58.64.26.81
System Administrateur / Support Technique
www.francexpress.com - www.serveur-express.com
|
