Hi all
i m facing a problem with my TUN setup
my real server is on a seperate network from the director and is not prone to
the ARP problem coz there is no routing for the VIP which leads to the
realserver's network!!
realserver is redhat 6.2 VIP 202.120.130.102
ipvsadm is correctly configured for tunnelling to the RIP and this i have
verified by using tcpdump on the Realserver and i see packets CIP->RIP hitting
the realserver
tcpdump on realserver
eth2 < 10.1.5.5.2051 > 202.120.130.102.www: S 421444096:42144409 6(0) win 65535
<mss 1460> (DF) (ipip)
where 10.1.5.5 is CIP 202.120.130.102 is the VIP
the director has only one NIC configured with VIP
result of ipvsadm .. the director and the realserver dont have any network in
common so the arp problem does not exist in my case
IP Virtual Server version 1.0.8 (size=32768)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ctiveConn InActConn
TCP 202.120.130.102:www rr
-> 10.1.11.225:www Tunnel 4 0 2
However connections from the client seem to hang
IP spoofing is enabled on the routers because doing
traceroute -n -s VIP someother IP FROM the REALSERVER
result in icmp port unreachable messages occuring on the Director which only
arps for the VIP.. this impies that spoofing of VIP from REALSERVER is
permitted
i have configured VIP on tunl0 of REALSERVER
telnet VIP www from realserver itself is also successful
ifconfig on REALSERVER gives
eth2 blah blah 10.1.11.225
tunl0 Link encap:IPIP Tunnel HWaddr
inet addr:202.140.120.102 Mask:255.255.255.255
UP RUNNING NOARP MTU:1480 Metric:1
route -n shows on REALSERVER
202.120.130.102 0.0.0.0 255.255.255.255 UH 0 0 0 tunl0
10.1.11.225 0.0.0.0 255.255.255.255 UH 0 0 0 eth2
10.1.11.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.1.11.51 0.0.0.0 UG 0 0 0 eth2
VIP
a route to the VIP exists with dev tunl0 ( only one VIP in use on the
realserver)
ip forwarding enabled on realserver
lsmod shows ipip ;-)
i dunno whats wrong with the configuration
pls help me out
BTW realserver is 6.2 redhat 2.2.14-5.0 ipip is a module
TIA
Khiz
P>S the only commands i used on the director
ipvsadm -A -t 202.120.130.102:80 -s wlc
ipvsadm -a -t 202.120.130.102:80 -r 10.1.11.225 -i
i did not use any configure script .. this seems fine coz the director is
actaully passing tunnelled packets to the Realserver..hope i m right
|