To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: DIRECTOR_GW
From: Joseph Mack <mack.joseph@xxxxxxx>
Date: Tue, 29 Jan 2002 07:09:06 -0500
Matthew Hollander wrote:
> Hi everyone,
> I running and using LVS-NAT.  In the lvs_nat.conf
> should the DIRECTOR_GW be set to a client IP or to the DIP?

your local router, or in a test setup the client.

people seem to be having trouble with this and they don't get a default
gw for their director. If this happens to you, can you send me _offline_
(to mailto:jmack@xxxxxxxx) the output of 

rc.lvs_nat > rc.lvs_out 2>&1

> This might be a related issue, but even though my LVS-NAT seems to work
> fine, I cannot traceroute to my client IP from my real server. 

The director doesn't NAT traceroute packets.

Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center, 
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA

<Prev in Thread] Current Thread [Next in Thread>