|
Thanks Malcolm looks like I was chasing ghosts. IIS was the problem all
along.
AJ
-----Original Message-----
From: Malcolm Turnbull [mailto:malcolm.turnbull@xxxxxxxxxxxx]
Sent: Tuesday, March 04, 2003 10:55 AM
To: AJ Lemke
Subject: Re: Windows 2000 Real Server
First of all check from the IIS server :
does https://xx.xx.191.5/
respond localy (i.e is IIS responding to the VIP)
if not check your iis virtual server settings and make sure port 443 is
responding to ANY ip address on the server.
If it is working localy then you have a poblem with your LVS config but
your ldirectord.cf file looks fine to me.
AJ Lemke wrote:
> You are able to set the subnet mask to 255.255.255.255 via the
> registry.
>
> We have set the the Subnet mask to 255.255.255.0 and 255.255.255.255.
> But we are still not see in any traffic on the Windows box.
>
> Correct me if I am wrong, Client makes the request, the request come
> into the LVS, the LVS directs the traffic to Windows box, then the
> Windows box replies directly to the Client originating the request.
>
> # HTTPS Virtual Service
> virtual=xx.xx.191.5:443
> fallback=127.0.0.1:443
> real=xx.xx.191.60:443 gate
> service=https
> checktype=connect
> request="index.asp"
> receive="HTTPS Test"
> scheduler=wlc
> persistent=600
> protocol=tcp
> quiescent = no
>
> In this scenario should this line <real=xx.xx.191.60:443 gate> have
> something other than gate? Should it be masq or something? Also one
> other thing I am using Ultramonkey for HA-Load balancing.
>
>
> -----Original Message-----
> From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
> [mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Malcolm
> Turnbull
> Sent: Tuesday, March 04, 2003 9:01 AM
> To: LinuxVirtualServer.org users mailing list.
> Subject: Re: Windows 2000 Real Server
>
>
> Yes if that is the subnet the server is on..
> The ideal would be 255.255.255.255 but windows does not allow that !
> :-) Last time I tried 255.0.0.0 I got the same problem no response to
> the VIP...
>
>
>
> AJ Lemke wrote:
>
>>By using a proper netmask do you mean 255.255.255.0 or something else?
>>Also I have the Client for Microsoft Network and File and Print
>
> sharing
>
>>turned off.
>>
>>Thanks for you help.
>>
>>AJ
>>
>>
>>-----Original Message-----
>>From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
>>[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Malcolm
>
>
>>Turnbull
>>Sent: Tuesday, March 04, 2003 8:47 AM
>>To: LinuxVirtualServer.org users mailing list.
>>Subject: Re: Windows 2000 Real Server
>>
>>
>>
>>Try using the proper net mask, ms networking gets confused
>>otherwise... also untick the options for Microsoft Networking & File &
>
>
>>Print sharing. And on the advanced tab set the priority to 254
>>
>>You shouldn't need to delete the routes
>>
>>
>>
>>AJ Lemke wrote:
>>
>>
>>>Hello all,
>>>
>>>I have a question concerning real servers.
>>>We have a 2 director LVS that load balances for 2 squid boxes in
>>>acceleration mode and a Windows 2000 box. We can send requests all
>>>day long to the squid boxes and the respond flawlessly but we seem to
>>>be unable to get the Windows box to respond to our requests.
>>>
>>>I have added a Microsoft loopback adapter to the box and given that
>>>adapter the corresponding VIP, which happens to be xx.xx.191.5, the
>>>x's are there to protect the innocent. I have given it a Netmask of
>>>255.0.0.0, which is in the how-to. This box does nothing but server
>>>https: for a client's website.
>>>
>>>In another part of the how-to it says to do a route delete <VIP's
>>>Network> <VIP Mask>. We have tried to do this numerous times but
>>>everytime it tells us "The specified route cannot be found".
>>>
>>>Do any of you know of a good way to see if the packets are getting
>>>through? Or if by looking at the information I have provided see
>>>anything that could or should be done different let me know.
>>>
>>>
>>>
>>>Thanks for your help
>>>AJ
>>>
>>>PS: Here is some information.
>>>
>>>Windows box:
>>>
>>>Ethernet: xx.xx.191.60
>>>Subnet: 255.255.255.0
>>>Gateway xx.xx.191.1
>>>
>>>Loopback: xx.xx.191.1
>>>Subnet: 255.0.0.0
>>>Gateway:
>>>
>>>Routes:
>>>C:\route print
>>>=====================================================================
>>>=
>>>==
>>>===
>>>Interface List
>>>0x1 ........................... MS TCP Loopback interface
>>>0x1000004 ...00 40 05 31 11 XX ...... Intel DC21140 PCI Fast Ethernet
>>>Adapter
>>>0x2000002 ...02 00 4c 4f 4f XX ...... MS LoopBack Driver
>>>
>>
>>======================================================================
>>==
>>
>>
>>>===
>>>
>>
>>======================================================================
>>==
>>
>>
>>>===
>>>Active Routes:
>>>Network Destination Netmask Gateway Interface
>>>Metric
>>> 0.0.0.0 0.0.0.0 xx.xx.191.1 xx.xx.191.60
>>>1
>>> xx.0.0.0 255.0.0.0 xx.xx.191.5 xx.xx.191.5
>>>1
>>> xx.xx.191.0 255.255.255.0 xx.xx.191.60 xx.xx.191.60
>>>1
>>> xx.xx.191.5 255.255.255.255 127.0.0.1 127.0.0.1
>>>1
>>> xx.xx.191.60 255.255.255.255 127.0.0.1 127.0.0.1
>>>1
>>> xx.255.255.255 255.255.255.255 xx.xx.191.5 xx.xx.191.5
>>>1
>>> xx.255.255.255 255.255.255.255 xx.xx.191.60 xx.xx.191.60
>>>1
>>> 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1
>>>1
>>> 224.0.0.0 224.0.0.0 xx.xx.191.5 xx.xx.191.5
>>>1
>>> 224.0.0.0 224.0.0.0 xx.xx.191.60 xx.xx.191.60
>>>1
>>> 255.255.255.255 255.255.255.255 xx.xx.191.60 xx.xx.191.60
>>>1
>>>Default Gateway: xxx.xxx.191.1
>>>
>>
>>======================================================================
>>==
>>
>>
>>>===
>>>Persistent Routes:
>>> None
>>>
>>>LVS:
>>>Director 1:
>>>Eth0: xx.xx.191.2
>>>Subnet: 255.255.255.0
>>>Gateway xx.xx.191.1
>>>
>>>Director 2:
>>>Eth0: xx.xx.191.3
>>>Subnet: 255.255.255.0
>>>Gateway xx.xx.191.1
>>>
>>>Virtual IP's
>>>Eth0:1: xx.xx.191.4 Cached Squid site
>>>Eth0:2: xx.xx.191.5 Load balances HTTPS:
>>>Eth0:3: xx.xx.191.6 Cached Squid site
>>>
>>>Ldirectord Config sample
>>># HTTPS Virtual Service
>>>virtual=xx.xx.191.5:443
>>> fallback=127.0.0.1:443
>>> real=xx.xx.191.60:443 gate
>>> service=https
>>> checktype=connect
>>> request="index.asp"
>>> receive="HTTPS Test"
>>> scheduler=wlc
>>> persistent=600
>>> protocol=tcp
>>> quiescent = no
>>>
>>>IPVSADM -L output
>>>
>>>IP Virtual Server version 1.0.4 (size=4096)
>>>Prot LocalAddress:Port Scheduler Flags
>>> -> RemoteAddress:Port Forward Weight ActiveConn InActConn
>>>TCP xx.xx.191.6:http lblc persistent 10
>>> -> xx.xx.191.200:http Route 1 0 0
>>>TCP xx.xx.191.4 lblc persistent 360
>>> -> x.xx.191.200:http Route 1 0 0
>>>TCP xx.xx.191.5:http lblc persistent 360
>>> -> xx.xx.191.200:http Route 1 0 0
>>>TCP xx.xx.191.5:https wlc persistent 600
>>> -> xx.xx.191.60:https Route 1 0 0
>>>
>>>Again thank you for your help.
>>>
>>>
>>>_______________________________________________
>>>LinuxVirtualServer.org mailing list -
>>>lvs-users@xxxxxxxxxxxxxxxxxxxxxx
>>
>>
>>>Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
>>>or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>>
>>
>>
>>
>>
>>
>
>
--
Regards,
Malcolm Turnbull.
Crocus.co.uk Ltd
01344 629661
07715 770523
|
