|
hi
at first thx for the invitation, you probably noticed that i cant do anything
usefull for the lvs project...to little time since my education to do all
things i want todo.
even not much time to test the threshold parameters, i reply in the next days.
On Sun, 22 Jun 2003 22:40:30 +0200
Roberto Nibali <ratz@xxxxxxxxxxxx> wrote:
> Hi,
>
> julius wrote:
> > a rr for ircds runs now, but most of the parameters that are shown in
> > ipvsadm --help outputs something like this :
> > root@xxxxxxxxxxxxxxxxxxx:/# ipvsadm --numeric
> > Try `ipvsadm -h' or 'ipvsadm --help' for more information.
> > root@xxxxxxxxxxxxxxxxxxx:/# ipvsadm --sort
> > Try `ipvsadm -h' or 'ipvsadm --help' for more information.
>
> Try ipvsadm --list --numeric as it is shown in the man page or the
> --help output. Just for your information: --numeric is an option and
> options only make sense in conjunction with commands. So in your example
> the command would be --list.
>
> Granted, we could make the --list the default command but this is not
> how software design is done normally :)
>
> > the max cons can be set by the threshold parameter right ?
>
> Yes, with -x for the lower treshold and with -y for the upper threshold.
> Again make sure you check out ipvsadm --help, it should give you all
> information you need. If not, we have to fix it.
>
> Also note that I have given you an output of my test in a previous email
> in this thread.
>
> Thanks for doing the tests,
> Roberto Nibali, ratz
> --
> echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq'|dc
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|
