|
I'm pretty sure you right on this, thanks.
> --- Joseph Mack <mack.joseph@xxxxxxx> wrote:
>> ken price wrote:
>> >
>> > You're absolutely correct in manually setting up
>> > masquerading on the director. It's not handled by
>> > LVS/Keepalived.
>>
>> whoa. You don't have to set up masquerading at all
>> in 2.4 kernels
>> for LVS to work.
>
>
> My bad. I should have been more specific. In a
> LVS-NAT setup using a 2.4 kernel, you're correct. in
> my experience, I have NEVER had to MASQ or SNAT the
> director for LVS to work. A client could make a
> connect to the real server and pull content.
>
> HOWEVER.
>
> For the real server to initiate an outgoing connection
> through the director, like the server pinging the
> client in this case, I've ALWAYS had to setup
> masquerading. LVS alone was never enough. If I'm
> wrong here, I apologize.
>
> -Ken
>
>
>>
>> > > The purpose of this setup is to test an LVS
>> cluster
>> > > on my private network.
>>
>> you don't say if this is LVS-NAT or LVS-DR
>>
>>
>> > > ---------------
>> > > | Client |
>> > > | (My Laptop) |
>> > > |192.168.1.100|
>> > > ---------------
>> > > |
>> > > ----------------
>> > > | 192.168.1.50 | < Virtual IP 192.168.1.250
>> > > | Director |
>> > > | 192.168.2.50 | < Virtual IP 192.168.2.250
>> > > ----------------
>>
>> I don't understand why you have 2 VIPs and why you
>> have
>> x.x.x.50 and x.x.x.250 pairs
>>
>> Joe
>>
>> --
>> Joseph Mack PhD, High Performance Computing &
>> Scientific Visualization
>> SAIC, Supporting the EPA Research Triangle Park, NC
>> 919-541-0007
>> Federal Contact - John B. Smith 919-541-1087 -
>> smith.johnb@xxxxxxx
>> _______________________________________________
>> LinuxVirtualServer.org mailing list -
>> lvs-users@xxxxxxxxxxxxxxxxxxxxxx
>> Send requests to
>> lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
>> or go to
> http://www.in-addr.de/mailman/listinfo/lvs-users
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|
