|
mike jones wrote:
> **************************************
> " 5.4. Setup LVS-DR for the service http
> IMPORTANT: Make sure the realservers are listening to port 80 on the VIP,
> 192.168.1.110 AND NOT to its own IP (not listening to the RIP e.g.
> 192.168.1.11, 192.168.1.12), i.e both realservers are listening to the same
> IP. Make the 2 webpages a little different so that you can tell which
> realserver you have connected to. You will need the VIP on lo:0 before the
> httpds will start"
> ***************************************
actually, for LVS-DR you need the realserver to listen to VIP:http_port.
You can have the RIP listening to anything at all, since it's not
involved in the LVS. I've fixed the documenation. Sorry about the
confusion.
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
SAIC, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
|
