|
Now i have already used LVS/DR under RHEL2.1 and RHEL3 for about two years,
redhat provide the cluster suite，the load balance suite is based lvs。
u can use pulse privoided by redhat, but u should write the lvs.cf yourself, if
needed, i can provide some example
-----原始邮件-----
发件人: Dongluo Chen [mailto:dongluo.chen@xxxxxxxxxxxx]
发送时间: 2004年7月19日 16:59
收件人: LinuxVirtualServer.org users mailing list.
主题: Re: LVS/Piranha and Direct Routing example
I do not use Piranha. But it seems that Piranha does not
support LVS/DR at present. The following paragraph is from
http://www.redhat.com/support/resources/howto/piranha/
"Currently, the LVS cluster supports one routing method,
Network Address Translation (NAT). (In the future, tunneling
and direct routing will be added.)"
Ultra Monkey provides LVS packages for Redhat Enterprise
Linux 3.0 . I think you could try it.
-Peter
----- Original Message -----
From: "Farrell, Doug" <DFarrell@xxxxxxxxxxxxxxxxxxxxx>
To: "LinuxVirtualServer.org users mailing list."
<lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, July 16, 2004 8:58 PM
Subject: LVS/Piranha and Direct Routing example
Hi all,
Does anyone have an example of a Piranha (LVS) software on a Redhat
Enterprise Linux 3.0 system using the Direct Routing system?
I've got a NAT configuration running, but am having no luck at all
getting a DR configuration working. If someone has DR working do you
think you could send me some samples of your configuration files so I
could see what you did? I'd also like an idea what you've done with
your hardware/network layout to get this to work.
Thanks,
Doug Farrell
Scholastic
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
