|
So taking a step back and re-evaluating what has been suggested, let me ask
this question. I have 3 systems that will be tied into my LVS setup, aside from
any of the clients that will send traffic to the LVS for re-direction.
The server that is the director has 2 NICS on 2 networks, one in the room it is
located and the other network that the realservers are on in a different
machine room. Both NICS have different IPS on different sub-nets, and the
gateway for the machine is set to the primary interface (eth0) network.
I have 2 systems that are single NIC machines I want to use as the realservers.
I don't have a private network available to use for these systems so LVS-NAT is
completely out. I don't really want to tunnel the connections, and it appears
that LVS-DR is the route I should go. Reading through the how-to, it isn't
quite clear as to which configure script I should use. My kernel is
2.4.21-20.ELsmp and the ipvsadm is 1.21-9.ipvs108.
I apologize for the ignorance, but would really appreciate the assistance. And,
if I actually do get a working setup going, will post back to this list on my
success with config files as well.....
Thanks
Scott
|
