|
thanks,
but is this correct:
at RS i have to:
#----------mini-rc.lvs_dr-realserver------------------
#installing default gw 192.168.1.254 for vs-dr
route add default gw 192.168.1.254
-> so my realserver is not more reachable over the internet, so i can not
more ssh to it.
I think with lvcs-dr /lvs-tun i'v not to change the default route of my
servers
> -----Original Message-----
> From:
> lvs-users-bounces+m.rautenberg=inetmx.de@xxxxxxxxxxxxxxxxxxxxx
> g
> [mailto:lvs-users-bounces+m.rautenberg=inetmx.de@linuxvirtuals
> erver.org] On Behalf Of Joseph Mack NA3T
> Sent: Montag, 26. September 2005 18:04
> To: LinuxVirtualServer.org users mailing list.
> Subject: Re: LVS over Internet / client director and
> realserver at different networks
>
> On Mon, 26 Sep 2005, M.Rautenberg wrote:
>
> > I have to use LVS-TUN, but how i have to configure the RS
> and the DIR?
>
> use the instructions in the mini-HOWTO for LVS-DR, except
> change use the LVS-Tun forwarder option when running ipvsadm.
> On the realservers, setup the VIP on tunl0:xxx.
>
> Joe
> --
> Joseph Mack NA3T EME(B,D), FM05lw North Carolina jmack (at)
> wm7d (dot) net - azimuthal equidistant map generator at
> http://www.wm7d.net/azproj.shtml Homepage
> http://www.austintek.com/ It's GNU/Linux!
> _______________________________________________
> LinuxVirtualServer.org mailing list -
> lvs-users@xxxxxxxxxxxxxxxxxxxxxx Send requests to
> lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
>
|
