keepalived not configuring LVS -- nothing in table

["Fong Vang" <sudoyang@xxxxxxxxx>]

I'm having problem getting keepalived to configure LVS -- it's not
populating LVS table.  I'm using keepalived 1.1.2 and LVS v1.2.0. 
This is my keepalived.conf file:

global_defs {
   notification_email {
     testuser@xxxxxxxx
   }
   notification_email_from testuser@xxxxxxxx
   smtp_server 10.1.11.57
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}

vrrp_instance VI_1 {
    interface eth0
    virtual_router_id 50
    nopreempt
    priority 100
    advert_int 1
    virtual_ipaddress {
        10.1.31.150
    }
}

virtual_server 10.1.31.150 88 {
    delay_loop 6
    lb_algo rr
    lb_kind NAT
    persistence_timeout 50
    protocol TCP

    real_server 192.168.1.1 80 {
        weight 1
    }
}

Upon startup, it doesn't complain about anything.  This is the only
info logged to messages:

Mar 15 20:47:06 winbuild-pllsax Keepalived: Starting Keepalived
v1.1.12 (03/12,2006)
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: Using MII-BMSR NIC
polling thread...
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: Registering Kernel
netlink reflector
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: Registering Kernel
netlink command channel
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: Registering
gratutious ARP shared channel
Mar 15 20:47:06 winbuild-pllsax Keepalived: Starting VRRP child
process, pid=6422
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: Configuration is
using : 34288 Bytes
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: ------< Global
definitions >------
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  Router ID = LVS_DEVEL
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  Smtp server = 10.1.11.57
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  Smtp server
connection timeout = 30
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  Email notification
from = fvang@xxxxxxxxxx
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  Email notification =
fvang@xxxxxxxxxx
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: ------< VRRP Topology >------
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:  VRRP Instance = VI_1
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Want State = BACKUP
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Runing on device = eth0
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Virtual Router ID = 50
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Priority = 100
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Advert interval = 1sec
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Preempt disabled
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:    Virtual IP = 1
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp:      10.1.31.150/32
brd 10.1.31.150 dev eth0 scope global
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: VRRP_Instance(VI_1)
Entering BACKUP STATE
Mar 15 20:47:06 winbuild-pllsax Keepalived_vrrp: VRRP sockpool:
[ifindex(2), proto(112), fd(7,8)]
Mar 15 20:47:10 winbuild-pllsax Keepalived_vrrp: VRRP_Instance(VI_1)
Transition to MASTER STATE
Mar 15 20:47:11 winbuild-pllsax Keepalived_vrrp: VRRP_Instance(VI_1)
Entering MASTER STATE
Mar 15 20:47:11 winbuild-pllsax Keepalived_vrrp: VRRP_Instance(VI_1)
setting protocol VIPs.
Mar 15 20:47:11 winbuild-pllsax Keepalived_vrrp: VRRP_Instance(VI_1)
Sending gratuitous ARPs on eth0 for 10.1.31.150

Any idea what could be wrong?  I've tried removing the VRRP section
without much luck.  I'm wondering why the virtual/real server sections
are not logged to the messages file..

Thanks for any help...