|
Sorry the 11 subnet for the lvs is 10.1.11.53
the default gw for the balancer is 10.1.10.1
How do i disable icmp redirects? i think i didnt
cheers
Julian
On 4/27/06, Christian Bronk <chbr@xxxxxxxx> wrote:
> Hi,
>
> 1. what is the default gw of the loadbalancer?
> 2. Have you disabled icmp redirects on the loadbalancer?
> 3 are you shure that you have the IP 10.1.11.63 on you lvs and your first
> realserver?
>
> cheers,
>
> Chris
>
> Julian de Anquin schrieb:
> > Hi all
> > Hi facing the following problem with lvs load balancing
> > I'll try to explain de scenario, if i'm missing something that would
> > be usefull for you to helpme , please let me know
> >
> >
> > The LVS server has the 10.1.10.53,
> >
> > with the 10.1.10.51 as virtual addres this address is made available
> > to the internet via NAT by a PIX Cisco Firewall
> > the 10.1.11.63 that;s the internal ip where it comunicates with the
> > real servers.
> > and 10.1.11.1 as virtul private ip that is used by the real servers
> > RealServer 1 has 10.1.11.63 in the internal network with gw 10.1.11.1
> > and the 10.1.10.63 ip that has access to go to mi database server,
> > with gw 10.1.10.1
> >
> >
> > The problem is as follows.
> > If i point to 10.1.10.51, the virtual ip, everything goes fine, the
> > real serves are reached, they reache the database server, and give the
> > response back to the client.
> >
> > However if the client if on internet, and points to the real ip, eg
> > 200.xxx.xxx.xxx, that gets nated to 10.1.10.51, the connection hags
> > and no response its get back to the server.
> >
> > Any clue on this? anyone has face the same problem?
> >
> >
> > --
> > Julian Eduardo de Anquin
> > thekiwie@xxxxxxxxx
> > Cordoba, Argentina
> > _______________________________________________
> > LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> > Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> > or go to http://www.in-addr.de/mailman/listinfo/lvs-users
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
--
Julian Eduardo de Anquin
thekiwie@xxxxxxxxx
Cordoba, Argentina
|
