|
Hello again,
Well I checked each node for http and indeed they are working. Chaning
the CheckType to connect seems to have at least gotten a better
reading from ipvsadm
IP Virtual Server version 1.0.8 (size=65536)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 172.16.60.233:80 rr persistent 600
-> 172.16.60.41:80 Route 1 0 15
-> 172.16.60.25:80 Route 1 0 0
So I can successfully hit 172.16.60.233 which ---> 172.16.60.41
welcome page comes up. If I stop the httpd service on this machine I
do not however get the 172.16.60.25 welcome page.
so my current setup is.
172.16.60.40 --- This is just running ldirectord
172.16.60.41 -- Real server all heatbeats and ldirectord are stopped
and no Firewall rules or arptable rules in place.
172.16.60.25 -- Real server same as above.
both .41 and .25 have the lo:0 card configured for 172.16.60.233
netmask 255.255.255.255
Seems like Im getting closer as at least now I can hit another machine
and my ipvsadm shows a weight value.
Do I need any FW or ARP rules at this piont on my director node?
scott
On 5/8/06, Scott Comboni <scomboni@xxxxxxxxx> wrote:
OK first thanks again for the response. I turned off evrything and
ran just ldirectord and noticed this..
when I run ipvsadm -L -n
Not seeing any of my items with a weighted value.
Also should I still have the arptables running in this config ?
I have to believe at this point I must be missing something very simple.
Both my Realservers have lo:0
lo:0 Link encap:Local Loopback
inet addr:172.16.60.233 Mask:255.255.255.255
UP LOOPBACK RUNNING MTU:16436 Metric:1
ipvsadm -L -n
IP Virtual Server version 1.0.8 (size=65536)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 172.16.60.233:80 rr persistent 600
-> 172.16.60.41:80 Route 0 0 0
-> 172.16.60.25:80 Route 0 0 0
-> 127.0.0.1:80 Local 1 0 0
My ldirectord file is posted as well.
checktimeout=10
checkinterval=2
#fallback=127.0.0.1:80
autoreload=no
#logfile="/var/log/ldirectord.log"
logfile="local0"
quiescent=yes
# Virtual Server for HTTP
virtual=172.16.60.233:80
fallback=127.0.0.1:80
real=172.16.60.41:80 gate
real=172.16.60.25:80 gate
service=http
request="index.html"
receive="Test Page"
scheduler=rr
persistent=600
protocol=tcp
checktype=negotiate
On 5/8/06, Francisco Gimeno <kikov@xxxxxxxxx> wrote:
> Hi..
>
> well I don't see clearly what's your architecture... but remember..
> In the real servers you don't need ip_vs nor ldirectord nor heartbeat.
>
> The VIP is owned by the Director Box ( ie: balancer ) that should be
> running ip_vs and ldirector and heartbeat ( if you want to have
> another Director Box for backup purposes ).
>
> If you want to make things simpler: forget for one moment the heartbeat.
>
> Just run ldirectord in the Director Box. In this case, you have to
> enable manually a eth0:0 ip alias in that box
>
> balancer# ifconfig eth0:0 VIP netmask 255.255.255.255
> realserver1# ifconfig lo:0 VIP netmask 255.255.255.255 ; route add -
> host VIP dev lo
> realserver2# ifconfig lo:0 VIP netmask 255.255.255.255 ; route add -
> host VIP dev lo
>
> then run ldirectord...
> and see what's happening in the director with ipvsadm -L -n
> You should see weight: 1 ( or whatever you have configured in
> ldirectord ) if the Server has been correctly detected, or weight: 0
> if the ldirector check failed...
>
> BR,
> Francisco Gimeno
> > Yes I verified this these items below. The lo:0 card I have is not up
> > on both Machines.. Should that be the case? The machine that is my
> > ldirectory Active node and realserver is
> > bosdamweb52 root]# /etc/ha.d/resource.d/LVSSyncDaemonSwap master
> > status
> > master running
> > (ipvs_syncmaster pid: 25685)
> >
> > This node is showing the apahce page.
> >
> > [root@bosdamweb52 root]# ip add sh
> > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
> > 4: eth0: <BROADCAST,MULTICAST,ALLMULTI,UP> mtu 1500 qdisc
> > pfifo_fast qlen 1000
> > link/ether 00:30:48:80:4b:8d brd ff:ff:ff:ff:ff:ff
> > inet 172.16.60.40/24 brd 172.16.60.255 scope global eth0
> > inet 172.16.60.233/24 brd 172.16.60.255 scope global secondary eth0
> > 5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
> > link/ether 00:30:48:80:4b:8e brd ff:ff:ff:ff:ff:ff
> >
> >
> > [root@bosdamweb53 ha.d]# ip add sh
> > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
> > inet 172.16.60.233/32 brd 172.16.60.255 scope global lo:0
> > 4: eth0: <BROADCAST,MULTICAST,ALLMULTI,UP> mtu 1500 qdisc
> > pfifo_fast qlen 1000
> > link/ether 00:30:48:80:4b:da brd ff:ff:ff:ff:ff:ff
> > inet 172.16.60.41/24 brd 172.16.60.255 scope global eth0
> > 5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
> > link/ether 00:30:48:80:4b:d9 brd ff:ff:ff:ff:ff:ff
> >
> > Im also reading another post someone sent.
> > http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-
> > NAT.html#one_network
> >
> > I currently have my default Gateway set to my Router not the director.
> >
> > Thanks for your continuing help on this.
> >
> >
> >
> >
> >
> >
> >
> >
> > On 5/8/06, Francisco Gimeno <kikov@xxxxxxxxx> wrote:
> >> hi
> >>
> >> the second part
> >>
> >> have you added the loopbacks ip in the real servers ?
> >>
> >> # ifconfig lo:1 172.16.60.233 netmask 255.255.255.255
> >> # route add -host 172.16.60.233 dev lo
> >>
> >> have you configured the VirtualHost in Apache for 172.16.60.233 ?
> >>
> >> go to the real servers, and check there:
> >> $ telnet 172.16.60.233 80
> >> GET / HTTP/1.1
> >> Host: HOSTNAME
> >> <Enter>
> >>
> >>
> >>
> >> > Hello Francicso thanks for the response.
> >> > I added another real server real=172.16.60.25:80 gate and no luck.
> >> > Seems I can only access the machine that currently has the VIP
> >> > established.
> >> >
> >> > scott
> >>
> >> __________________________________
> >
> > --
> >
>
--
--
Scott Comboni
President
Zenplex Inc.
132 Pepes Farm Road Unit #6
Milford CT, 06460
|
