|
Hi Todd,
Attached is the ldirectord debug log caputured by running it from /
*****************************************************************
[root@ctestsrv2 /]# ldirectord -d /etc/ha.d/ldirectord.cf start
DEBUG2: Running exec(/usr/sbin/ldirectord -d /etc/ha.d/ldirectord.cf start)
Running exec(/usr/sbin/ldirectord -d /etc/ha.d/ldirectord.cf start)
DEBUG2: Starting Linux Director v1.77.2.32 with pid: 16125
Starting Linux Director v1.77.2.32 with pid: 16125
DEBUG2: Running system(/sbin/ipvsadm -E -t 10.226.193.250:80 -s rr )
Running system(/sbin/ipvsadm -E -t 10.226.193.250:80 -s rr )
DEBUG2: Changed virtual server: 10.226.193.250:80
Changed virtual server: 10.226.193.250:80
DEBUG2: Running system(/sbin/ipvsadm -E -t 10.226.193.230:8070 -s rr )
Running system(/sbin/ipvsadm -E -t 10.226.193.230:8070 -s rr )
DEBUG2: Changed virtual server: 10.226.193.230:8070
Changed virtual server: 10.226.193.230:8070
DEBUG2: Enabled server=10.226.193.189
DEBUG2: Enabled server=10.226.193.190
DEBUG2: Disabled server=10.226.193.189
DEBUG2: Running system(/sbin/ipvsadm -e -t 10.226.193.230:8070 -r
10.226.193.190:8070 -g -w 0)
Running system(/sbin/ipvsadm -e -t 10.226.193.230:8070 -r
10.226.193.190:8070 -g -w 0)
DEBUG2: Quiescent real server: 10.226.193.190:8070 ( x
10.226.193.230:8070) (Weight set to 0)
Quiescent real server: 10.226.193.190:8070 ( x 10.226.193.230:8070)
(Weight set to 0)
DEBUG2: Disabled server=10.226.193.190
DEBUG2: Checking negotiate: real
server=negotiate:http:tcp:10.226.193.189:80:::\/ldirector\.html:lb
(virtual=tcp:10.226.193.250:80)
DEBUG2: check_http: url="http://10.226.193.189:80/ldirector.html";
virtualhost="10.226.193.189"
LWP::UserAgent::new: ()
LWP::UserAgent::request: ()
LWP::UserAgent::send_request: GET http://10.226.193.189:80/ldirector.html
LWP::UserAgent::_need_proxy: Not proxied
LWP::Protocol::http::request: ()
LWP::Protocol::collect: read 3 bytes
LWP::UserAgent::request: Simple response: OK
DEBUG2: Enabled server=10.226.193.189
DEBUG2: check_http: http://10.226.193.189:80/ldirector.html is up
DEBUG2: Checking negotiate: real
server=negotiate:http:tcp:10.226.193.190:80:::\/ldirector\.html:lb
(virtual=tcp:10.226.193.250:80)
DEBUG2: check_http: url="http://10.226.193.190:80/ldirector.html";
virtualhost="10.226.193.190"
LWP::UserAgent::new: ()
LWP::UserAgent::request: ()
LWP::UserAgent::send_request: GET http://10.226.193.190:80/ldirector.html
LWP::UserAgent::_need_proxy: Not proxied
LWP::Protocol::http::request: ()
LWP::Protocol::collect: read 3 bytes
LWP::UserAgent::request: Simple response: OK
DEBUG2: Enabled server=10.226.193.190
DEBUG2: check_http: http://10.226.193.190:80/ldirector.html is up
DEBUG2: Checking connect: real
server=connect:tcp:10.226.193.189:8070:::\/:
(virtual=tcp:10.226.193.230:8070)
DEBUG2: Disabled server=10.226.193.189
DEBUG3: Deactivated service 10.226.193.189:8070: Died at
/usr/sbin/ldirectord line 2000.
DEBUG2: Checking connect: real
server=connect:tcp:10.226.193.190:8070:::\/:
(virtual=tcp:10.226.193.230:8070)
DEBUG2: Disabled server=10.226.193.190
DEBUG3: Deactivated service 10.226.193.190:8070: Died at
/usr/sbin/ldirectord line 2000.
Alarm clock
*****************************************************************
But again, ldirectord was dead immediately. Any ideas?
- Jiang -
On 6/24/06, lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
<lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Send lvs-users mailing list submissions to
lvs-users@xxxxxxxxxxxxxxxxxxxxxx
To subscribe or unsubscribe via the World Wide Web, visit
http://www.in-addr.de/mailman/listinfo/lvs-users
or, via email, send a message with subject or body 'help' to
lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
You can reach the person managing the list at
lvs-users-owner@xxxxxxxxxxxxxxxxxxxxxx
When replying, please edit your Subject line so it is more specific
than "Re: Contents of lvs-users digest..."
Today's Topics:
1. Re: ldirecotord failed to restart after changing
checkinterval! pls help!! urgent!!!! (Todd Lyons)
---------- Forwarded message ----------
From: Todd Lyons <tlyons@xxxxxxxxxx>
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Date: Fri, 23 Jun 2006 09:48:32 -0700
Subject: Re: ldirecotord failed to restart after changing checkinterval! pls
help!! urgent!!!!
On Fri, Jun 23, 2006 at 08:21:23PM +0800, Jiang wrote:
>Hi,
>
>I tried to increase the check interval from 1s to 10s, but after that,
>ldirecitord daemon disappeared, and nothing has been recorded in log
>file. attached is the record I run it in debug mode.
>
>***********************************************************
>[root@ctestsrv1 init.d]# ldirectord -d /etc/ha.d/ldirectord.cf start
>DEBUG2: Running exec(/usr/sbin/ldirectord -d /etc/ha.d/ldirectord.cf start)
>Running exec(/usr/sbin/ldirectord -d /etc/ha.d/ldirectord.cf start)
>DEBUG2: Starting Linux Director v1.77.2.32 with pid: 10790
>Starting Linux Director v1.77.2.32 with pid: 10790
>DEBUG2: Running system(./ipvsadm -A -t 10.226.193.250:80 -s rr )
>Running system(./ipvsadm -A -t 10.226.193.250:80 -s rr )
>Usage: ipvsadm
> {start|stop|restart|status|panic|save|reload|reload-force}
It looks like it's running an ipvsadm init script in /etc/init.d instead
of the ipvsadm binary, usually in /sbin.
>Any ideas? Many thanks!!!!!
Don't be in /etc/init.d when running in debug mode. Here's the relevant
code from ldirectord:
if ($DEBUG>0 and -f "./ipvsadm") {
$IPVSADM="./ipvsadm";
The above means that if it finds an ipvsadm in the current directory, it
will use that instead of the normal locations that it would look for it,
as shown below:
} else {
if (-x "/sbin/ipvsadm") {
$IPVSADM="/sbin/ipvsadm";
} elsif (-x "/usr/sbin/ipvsadm") {
$IPVSADM="/usr/sbin/ipvsadm";
} else {
die "Can not find ipvsadm";
}
}
--
Regards... Todd
we're off on the usual strange tangents. next will be whether
it is ethical to walk in your neighbor's open house if they're
running ipv6:-). --Randy Bush
Linux kernel 2.6.12-22mdksmp 2 users, load average: 0.00, 0.04, 0.07
_______________________________________________
lvs-users mailing list
lvs-users@xxxxxxxxxxxxxxxxxxxxxx
http://www.in-addr.de/mailman/listinfo/lvs-users
--
|
