LVS
lvs-users
[Top] [All Lists]
Google
 
Web LinuxVirtualServer.org
<prev [Date] next> <prev [Thread] next>

Re: connecting through the lvs twice - failover fails

from [Sebastian Vieira] [Permanent Link]
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: connecting through the lvs twice - failover fails
From: "Sebastian Vieira" <sebvieira@xxxxxxxxx>
Date: Thu, 27 Jul 2006 14:51:35 +0200 
Forgot to mention that the LVS is using bonding on eth0 and eth1.  I don't
know if this matters. I have no problem with bonding (set to active-backup
=  mode 1) :   yanking a cable from one of the nics gets picked up by
bonding and the connection never drops.


Sebastian
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  connecting through the lvs twice - failover fails, Sebastian Vieira
Next by Date:  Re: connecting through the lvs twice - failover fails, Joseph Mack NA3T
Previous by Thread:  Re: connecting through the lvs twice - failover fails, Joseph Mack NA3T
Next by Thread:  ldirectord and custom executables, Paulo F. Andrade
Indexes:  [Date] [Thread] [Top] [All Lists]