RE: ipvs with ipsec

["Farid Sarwari" <fsarwari@xxxxxxxxxxxxxxxxxxxxx>]

> so you have an ipsec0 interface and you can put an IP on it 
> and route to/from it just like with eth0? Can you use 
> iproute2 tools on ipsec0?

With Kernel 2.6 there is no more ipsec0 interface, but you can use
iproute2 to alter the routing table. You wouldn't want to modify the
routes to the tunnel because ipsec takes care of that, but you can
modify routes for traffic that is coming through the tunnel destined for
LVS-DR.